TROUBLE SHOOTING
01. DVR can’t power on
a.
Please make sure if DVR is properly connected to the car charger. Since the built-
in battery is only to save the last file in case of emergency, powering ON with the
12V car charger is suggested. It is recommended to ONLY use the 12V car charger
that comes with the device, do NOT use a standard vehicle USB port.
b. Reset DVR to default settings.
02. Stop recording or „Card Full“ Error Massage
a.
CLASS 10 or above micro SD card is recommended. Micro SD card specification va-
ries from one brand to another, which may not function as expected when using
with this DVR. Please test for micro SD compatibility before purchasing.
b. Usually caused by too many „locked“ files
c.
Go to settings, select Format, delete all data. If road conditions are too bumpy, this
may also cause too many locked files on the micro SD card, in this case lower the
G-Sensor sensitivity to Low.
d.
Rest the device by sticking in a sharp object(paper clip) into the reset hole.
03. „No Card“Error Massage
a.
Please confirm that the micro SD Card is inserted correctly and „clicks“to lock. If
not, the SD Card is most likely inserted wrong.
b. Format SD card using the device(located in settings).
04. Date&Time are incorrect
a.
Reset the date and time in the System Menu. If the internal battery runs comple-
tely flat, then the device needs to be fully charged and the date/time will need
to be re entered.
EN
Blaupunkt BP 2_2 Manual All Languages 04.indd 39
13.08.2021 11:51:08