32
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮
To raise the system volume, turn
the volume control
2
to the right.
➮
To lower the system volume, turn
the volume control
2
to the left.
Setting the switch-on volume
You can set the volume at which you
wish the car radio to play when switched
on.
➮
Press the MENU button
8
.
➮
Press the or button
:
repeat-
edly until “ON VOLUME” appears
on the display.
➮
Use the buttons
:
to set the
switch-on volume.
If you select the “0” setting, the volume
played before the unit was last switched
off will be reactivated.
Note:
●
To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
when the unit was switched off, the
volume will be reset to “38” when
the unit is switched on again.
When you have finished making your
changes,
➮
press the MENU button
8
or OK
;
twice.
Mute setting
This feature enables you to lower the
system volume instantaneously (mute).
➮
Briefly press button
3
.
“MUTE” appears on the display.
Activating the mute setting
The unit's mute level is adjustable.
➮
Press the MENU button
8
.
➮
Press the or button
:
repeat-
edly until “MUTE LEVEL” appears
on the display.
➮
Use the buttons
:
to set the
mute level.
➮
When you have completed the set-
ting, press either the MENU button
8
or OK
;
twice.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mo-
bile telephone or navigation system,
then when the telephone is taken “off
the hook”, or when the navigation sys-
tem is speaking, the car radio is muted.
The telephone conversation or speech
output are reproduced via the car radio
speakers. This requires the mobile tel-
ephone or navigation system to be co-
nnected to the car radio as described
n the installation instruction
. Your Blaupunkt dealer can tell you whi
h navigation systems can be used wi
h your car radi
. If a traffic announcement is receiv
d during a telephone call, or while t
e navigation system is speaking, the tra-
VOLUME ADJUSTMENT
