Blaupunkt 5B49M1 Series, Инструкция по эксплуатации

Страница: 14 / 52

en
Before using for the first time
14
K
Before using for the first
time
Before using for the first time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Initial use
The time will appear on the display once the appliance
is connected to the power supply. Set the current time.
Setting the time
The clock is set to 12:00 by default.
1.
Set the time in the settings area.
2.
Touch the
r
sensor to confirm.
The set time is displayed in the display panel.
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
Make sure that there is no packaging (e.g. polystyrene
pellets) left in the cooking compartment. Before heating
up the appliance, wipe the smooth surfaces in the
cooking compartment with a soft, damp cloth. Make
sure that the kitchen is well ventilated while the oven is
heating up.
Apply the settings indicated. You can find out how to
set the heating function and the temperature in the next
section.
~
"Operating the appliance" on page 14
Turn off the oven once the specified time has elapsed.
Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a dish
cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Next, we will explain how to configure the
settings on your appliance.
Switching the oven on and off
To switch the oven on or off, touch the
#
button.
Setting the heating function and temperature
It is very easy to apply the settings you require to your
appliance using the buttons and the settings area. In
the heating function table, you will find the optimal
heating functions for all kinds of food.
Example in the picture: Top/bottom heating
B
at
190 °C.
Switch on the oven using the main switch
#
. The
symbols for the default type of heating and temperature
(
9
and 160 °C) light up in the display panel. This
setting can be started immediately. To do this, touch the
t
sensor.
To select a different type of heating or temperature,
proceed as follows:
1.
Touch the
8
sensor.
2.
Select a heating function in the settings area.
3.
Touch the
y
sensor.
4.
Select the temperature or grill setting in the settings
area.
5.
Touch the
t
sensor.
The oven will start heating after a few seconds.
When your food is ready, switch off the oven using the
main switch.
Note:
You can also set a cooking time and an end
time.
~
"Time-setting options" on page 15
Settings
Heating function 3D hot air
9
Temperature Maximum
Cooking time 1 hour