5
Using the 6 Litre Air Cooler
STEP 1: Plug in and switch on the air cooler at the mains power supply.
STEP 2: To turn on the air cooler and activate the purifier function, select the desired cooling speed by
pressing any one of the adjustable cooling speed buttons (LOW, MID, HIGH).
STEP 3: Activate the swing function by pushing ‘SWING’; the vertical grills of the air cooler will begin to
turn left and right. To stop the vertical grills from turning, press ‘SWING’ once more.
STEP 4: To regulate the airflow up or down, manually adjust the horizontal grills on the front of the air
cooler.
STEP 5: Cool and humidify air by pressing ‘COOL’. The air cooler will begin to circulate water across the
evaporation pad. To stop the function, press ‘COOL’ once more.
STEP 6: Turn off the air cooler by pressing ‘OFF’.
Note: The air cooler is not designed to significantly reduce the room temperature; it provides a cool
breeze.
When positioning the air cooler, do not lift it by the front panel; move it using the handles and the 360°
castor wheels.
Warning: Do not use the humidifier function when the water tank is empty or if it is filled below the
min. fill line.
The air cooler should not run continuously for more than 10–12 hours at any one time.
Check the water level regularly.
Do not attempt to operate the ‘COOL’ function if there is no water in the tank, as this will cause damage
to parts.
STORAGE
Drain the water tanks and allow the air cooler to cool before storing in a cool, dry place. �Carefully coil
the power cable to avoid damage during storage.
STEP 2
STEP 4
