Always wait until the air cooler has stopped completely and unplug it from the mains power supply
before performing any cleaning or user maintenance.
STEP 1: The water tank must be drained of water after each use. To do so, twist the water tank lock and
carefully pull the water tank out from the air cooler. Twist the water pump lock on the bottom of the
water tank to remove the pump and free the water tank. Carefully empty the contents of the water
tank down a drain. Once the water tank has been drained, wipe away any excess water with a soft
cloth.
STEP 2: To clean the mesh filter, remove the two securing screws at the back of the air cooler and
remove the mesh filter carrier. The mesh filter carrier can be pulled away from the air cooler; remove
any loose fibres by hand, taking care not to pierce the mesh filters. The mesh filter can be washed in
warm water with a mild detergent and a soft brush; allow to dry thoroughly before use.
STEP 3: Wipe the air cooler with a soft, damp cloth and allow to dry thoroughly. Replace the mesh
filter carrier and reinsert the securing screws.
Do not use flammable liquid, abrasive cleaning solvents, polishes or scouring pads to clean the air
cooler, as this may cause damage.
Note: Clean the air cooler and all of its parts regularly to reduce the risk of limescale and bacteria
forming.
CARE AND MAINTENANCE
7
