BLAUBERG SMART, Инструкция по эксплуатации, Страница: 19 / 23

If humidity changes the fan is turned on to higher speed to remove excessive humidity.
After humidity stabilization in the room the humidity timer is activated and the fan runs
within time period set by the humidity extraction timer and then reverts to the previous
mode. To select the humidity extraction mode, press the "HUMIDITY MODE" button on
the control panel or the "QUIET and "MAXIMAL" buttons on the remote controller.
To display the current mode, press the "HUMIDITY MODE" button once.
Note: Stabilization of the humidity is understood as change of humidity level not
more than by 3% within 5 minutes.
MAXIMAL
Humidity-response mode with the impeller speed that ensures the best
air capacity. This mode is recommended for the bathrooms above 6 m2.
QUIET
Humidity-response mode with the impeller speed providing silent fan
operation. This mode is recommended for small bathrooms.
28
After humidity stabilization the fan continues operating some time at higher speed for total
humidity removal. This timer is adjustable for 30, 45 or 60 minutes.
The default time is 30 minutes. If humidity changes less by 20% for 10 minutes the timers
setting automatically drops to 15 min.
Humidity extraction timer adjustment:
On the control panel: press and hold the button "MODE", then press the button "TIMER".
On the remote controller is this adjustment not available.
To display the current humidity extraction timer settings, press and hole the button "MODE"
and then press the button "TIMER" once.
29
30 min
SELECTION OF HUMIDITY
EXTRACTION MODE
HUMIDITY TIMER ADJUSTMENT
45 min 60 min
19