background image

MODEL

KOMFORT EC 

D5(B)180

KOMFORT EC 

D5(B)180-E*

KOMFORT 

D5 180

KOMFORT 

D5 180-E*

Voltage [V/50 (60) Hz] 

1~230

Maximum fan power [W] 

87

117

Maximum unit current without a heater [A] 

0.71

0.54

Maximum air flow [m

3

/h] 

220

Sound pressure level at 3 m distance [dBA]

33

35

Transported air temperature [°C]  

from -25 up to +40

Casing material 

EPP

Insulation 

EPP (30-15 mm)

Filtering class of the extract filter 

G4

Filtering class of the supply filter 

G4, F7 

G4 (F7 – optional)

Weight [kg]

14

Heat recovery efficiency [%] 

86-98

79-94

86-98

79-94

Heat exchanger type 

counter-flow

Heat exchanger material

polystyrene

enthalpy

polystyrene

enthalpy

* The unit is equipped with an enthalpy heat exchanger that doesn’t require condensate drainage.

TECHNICAL DATA

The unit is designed for indoor application with the ambient temperature ranging from +1 °C up to +40 °C and relative humidity up to 
60 % without condensation. In cold, damp rooms, there is a possibility of freezing or condensation inside and outside the casing.
In order to prevent condensation on the internal walls of the unit, it is necessary that the surface temperature of the casing is 2-3 °C above 
the dew point temperature of the transported air.
The unit should be operated continuously, and in cases where ventilation is not necessary, reduce the air flow of the fans to a minimum 
(20%). This will ensure a favorable indoor climate and reduce the amount of condensation inside the unit, which can damage electronic 
components. Never use the unit for dehumidification, for example, of new buildings.
The unit is rated as a Class I electrical appliance.
Hazardous parts access and water ingress protection rating:
IP22 for the unit connected to the air ducts
IP44 for the unit motors
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.

MODEL

DIMENSIONS [MM]

Ø

 D

A

A1

B

B1

B2

H

H1

H2

KOMFORT (EC) D5(B)180(-E)

150

1009

900

600

326

163

264

250

110

А

H

H1

H2

А1

øD

B

B2

B1

www.blaubergventilatoren.de

KOMFOrt (EC) d5(B)180(-E)

6

Содержание KOMFORT D5 180

























Отзывы: