10
www.blaubergventilatoren.de
FRESHBOX E120
Function Button/Button
combination
Indication
1
Unit activation/deactivation
Using the remote control.
Fig. 8
Fig. 9
Using the control panel.
2
Speed selection
Low speed - 40 m
3
/h, medium speed - 80 m
3
/h, high speed - 120 m
3
/h.
Speed setting up via the control panel (low-medium-high).
Fig. 9
Speed step-down via the control panel (low-medium-high).
Speed step-up via the remote control (low-medium-high).
Speed step-down via the remote control (low-medium-high).
Low speed activation via the remote control.
Medium speed activation via the remote control.
High speed activation via the remote control.
3
Supply air heating
The unit is equipped with a posistor electric heater for warming of supply air during cold seasons.
Heater activation/deactivation via the control panel.
press and
hold
press
Heater activation via the remote control.
Heater deactivation via the remote control.
WARNING!!! The unit continues operating within 30 seconds after turning off to ensure heat removal from the heating elements.
4
Timer
The timer ensures automatic changeover from a current operation mode into high speed mode and revert to the previous operation mode in set time
period. To activate/deactivate timer:
Via the control panel: press the button once to set the timer for 20 minutes, each subsequent pressing
prolongs the timer operation for 10 minutes, till maximum 60 minutes.
press and
hold
press
Timer deactivation via the control panel.
press and hold 3 sec
Timer activation using the remote control. The only available timer setting is 20 minutes.
Timer deactivation using the remote control: turn the unit off and restart it.
Table 2. Unit control and setup
