www.blaubergventilatoren.de
5
FRESHBOX 60
Table 1. Technical data of the unit
TECHNICAL DATA
MOUNTING AND OPERATION GUIDELINES
Parameters
FRESHBOX 60
Unit voltage / 50-60 Hz [V]
100-240
Speed
min
med
max
Power [W]
4.2
9.6
15.4
Current [А]
0.02
0.04
0.07
Max. air flow [m
3
/h]
30
45
60
RPM
1165
1720
2685
Sound pressure level at 3 m distance [dBA]
22
25
29
Max. transported air temperature [°С]
-20 up to +50
Filter: extract/supply
G2
Heat recovery efficiency [%]
79
74
70
Heat exchanger type
counter-flow
Heat exchanger material
polystyrene
Ingress Protection Rating
IP22
Weight [kg]
10.3
The unit is mounted with the master plate from the delivery set, fig. 4. Please
prepare also two air ducts of required length or one of the mounting sets
(MS1 FRESHBOX 60 or MS2 FRESHBOX 60).
The mounting set MS1 FRESHBOX 60 is specially designed for mounting of
the unit at general construction stage. It includes two plastic air ducts, each
500 mm long and two master plates for marking the holes on inner and outer
wall sides.
The mounting set MS2 FRESHBOX 60 is specially designed for mounting of the
unit in a ready-built premise. It includes two plastic air ducts, 500 mm long, a
master plate for matching holes and an outer ventilation hood AH FRESHBOX
60 that prevents ingress of foreign objects inside the unit. If the building’s
wall thickness is above 500 mm, please prepare two Ø125 mm air ducts of
required length.
393
526
187
124
159
121
* Allowable deviation of the rated voltage: ±10%.
**Noise level is measured at 3 m distance from the unit connected to the air
ducts, in free room.
Fig. 3. Overall dimensions
Drill 2 holes, 60 mm deep,
with Ø 8 mm
Drill 2 holes, 60 mm deep,
with Ø 8 mm
2 holes with Ø 130 mm for
Ø125 mm round duct. Fill the gap
between the air duct and the wall
with mounting foam.
2 holes with Ø 130 mm for
Ø125 mm round duct. Fill the gap
between the air duct and the wall
with mounting foam.
Fig. 4. Master plate
