BLAUBERG Ventilatoren S25, Руководство пользователя, Страница: 10 / 20

www.blaubergventilatoren.de
S25
10
BASIC SETTINGS MENU
Main page Menu Basic settings
Main page Menu Basic settings Temperature
15
˚
C
— set the desired temperature in the room and select from
the list of air temperature control options:
Ventilation
— the unit only works in the heat recovery mode.
Heating
— the unit automatically warms the air to a pre-set level by
activating the heater or using the outdoor air heat.
Cooling
— the unit automatically cools the air to a pre-set level by using the
air cooler or the outdoor air cold.
Auto
— the unit automatically maintains a pre-set air temperature (heating/
cooling).
Main page Menu Basic settings Air quality
Set threshold values for the humidity, CO2, PM2.5, and VOC sensors.
The unit will automatically maintain the user values by smoothly increasing
or decreasing the fan speed.
Main page Menu Basic settings Timers
Once the
Main timer
is enabled via the
Main page
menu, the air handling
unit temporarily switches to the following settings:
Speed
off
— pre-set speed selection: 0 (
Standby
), 1, 2, 3 …
Hours
15
:
Minutes
0
— timer set-up.
Temp.
off ˚
C
— select the desired temperature control level:
0 (
off
), +15 °C…+30 °C. If
off
is selected, temperature control is disabled for
the duration of
Timer
operation.
Boost switch off delay
: setting the period of time (0–60 min) for the Boost
mode deactivation delay after the discrete input starts receiving no signal
(Boost switch).
Boost switch on delay
: select the delay time for the Boost mode activation
after the supply of a signal to the discrete input (Boost switch).
To enable the discrete input (Boost switch), go to
Engineering menu
Sensors
. To set up the air flow rate, go to
Engineering menu Air flow
.