BLAUBERG Ventilatoren KOMFORT EC SKE270-1.5 Скачать руководство пользователя страница 11

Страница: 11 / 20

www.blaubergventilatoren.de

KOMFORT EC SKE270-1.5

Function

Button/Button combination

Indication

ATTENTION! Changing the unit parameters results in loss of factory settings for the fan power! ATTENTION! The fan power adjustment is possible from

the wall-mounted control panel only!

6 Fan speed adjustment

The fan power is adjusted during the fan speed setup mode. Changeover to the fan speed setup mode is possible only when the unit if OFF.

Changeover to the fan setup speed mode.

Indication of changeover to the

fan setup speed mode

Adjusted speed indication

press and hold

press and hold for 3

seconds

Adjusted speed selection

Supply fan power step-up/down. Each pressing increases/decreases the fan power by

1%.

press and hold

press:

−

stepping up

−

stepping down

Current supply fan power indicator during set-up.

Current supply fan power indicator

Supply fan adjustment indicator

when pressed

Extract fan power step-up/down. Each pressing increases/decreases the fan power by

1%.

press and hold

press:

−

stepping up

−

stepping down

Current extract fan power indicator during set-up.

Extract fan adjustment indicator

Supply fan adjustment indicator

when pressed

Exiting the fan speed setup mode.

Reset to factory settings. Enter the fan power adjustment mode.

The factory fan speed settings:

low speed - 40%, medium speed - 70%, high speed - 100%.

press and hold for 3 seconds

and

Table 3. Unit control and parameter setting (continued)

KOMFORT_EC_SKE270_v2(4)_EN.indd 11

07.08.2015 14:25:47

Содержание KOMFORT EC SKE270-1.5





















Результаты поиска

Содержание KOMFORT EC SKE270-1.5

Отзывы:

Похожие инструкции для KOMFORT EC SKE270-1.5

Бренды по названию

Популярные бренды

BLAUBERG Ventilatoren KOMFORT EC SKE270-1.5, Руководство по эксплуатации

Результаты поиска

Содержание KOMFORT EC SKE270-1.5

Отзывы:

Похожие инструкции для KOMFORT EC SKE270-1.5

Бренды по названию

Популярные бренды