BLAUBERG Ventilatoren Hybrid, Руководство пользователя

Страница: 12 / 28

hybrid
12
www.blaubergventilatoren.de
INSTALLATION
The unit can be installed under the ceiling or on the wall.
The unit can be mounted on threaded rods or anchor bolts. Mounting brackets for mounting the unit are included in the delivery set.
Depending on the spigot configuration, prepare the necessary holes for the ducts (Ø 150 mm) and fasteners in the ceiling or wall.
To prevent freezing of the wall, the air ducts must be thermally insulated. Ensure a minimum duct slope of 3º downwards towards the
street.
min 3°
When installing through a suspended ceiling, provide openings for ductwork and/or stud bolts.
Unit fixing
Fixing to load-bearing surface Fixing through a suspended ceiling Fixing to the wall
1
2
2*
3
5
4
8
7
6
2
2*
3
5
4
1
5*
2
4
3
1 — M6 anchor bolt
2 — nut
3 — mounting bracket
4 — anti-vibration washer
5 — washer
* — make sure to use two nuts!
1 — M6 anchor bolt
2 — nut
3 — mounting bracket
4 — anti-vibration washer
5 — washer
6 — anchor sleeve M6
7 — threaded rod M6
8 — suspended ceiling
* — make sure to use two nuts!
1 — M6 anchor bolt
2 — mounting bracket
3 — anti-vibration washer
4 — washer
6 — anchor sleeve M6
* — make sure to use two nuts!