Blastrac BMP-335, Руководство по эксплуатации

Страница: 22 / 30

22
www.blastrac.eu
Screws, bolts etc. that have been removed must be replaced with those of the same quality, strength, material
and design.
Do not weld, flame cut or perform grinding works on or near the machine. Danger of fire or explosion exists!
Provide adequate ventilation when working in a confided space.
Secure the maintenance area if necessary.
Prevent premature wear by keeping the machine as dust free as possible. Clean the machine for this reason
regularly with a vacuum cleaner.
Clean the machine every day with air and non-aggressive materials. Never use a high pressure water cleaner
to clean the machine.
6.1 Maintenance of the bearings
With normal daily use the bearing should be greased 4x per year.
The quantity of grease should be 5-10 gram. This is equal to 2-6 pumps of grease.
Be careful, too much grease is not good for the bearing!
Use the grease which is recommended by Blastrac:
E08729 – bearing grease.
This grease is specially made for this kind of application.
Using other grease will damage the bearing.
E08729 - Bearing grease.
Every 3 months