www.blastrac.eu
15
Battery charging
The battery for the battery-drive (RSBD-version machines) will be charged automatically during
work.
Charging the battery before work:
1. Make sure the machine receives 3x400V.
2. Make sure the switch on the electrobox is on 1=Remote or 0=Local.
3. Make sure that the emergency switch and deadman switch are not blocking the machine.
4. Start and stop the grinding motor.
The machine should be charging the battery of the drive system now.
If the batteries are empty, this could take 3 hours before they are full.
Set the switch to 2=accu, the machine should be able to drive on the batteries now.
