14
www.blastrac.eu
Remote controlled driving
-
Push the joystick (42) in the desirable direction to the drive the machine. The further the joystick is
pushed into the desirable position, the faster the machine moves.
-
The SPEED FORWARD button (50) & the TRACKING button (51) don’t work in the manually controlled
mode, these functions only work in AUTO DRIVE-mode.
-
You can turn the machine around its axle by pushing the joystick totally to the right or totally to the
left.
-
The machine can also turn around one wheel, this can be done by pushing the joystick to the left or
right upper corner.
AUTO DRIVE-mode
-
Use the FORWARD/REVERSE-switch (52) to select forward or reverse driving.
-
Use the SPEED FORWARD (50) to select the driving speed, always start slowly at first.
-
Set the TRACKING (51) in the middle position.
-
Now push the DRIVE-button (53), to drive the machine automatically.
-
Steer the machine left or right with TRACKING (51) and change the driving speed with (50).
NOTE: The joystick does not work in AUTO DRIVE-mode.
Push the DRIVE-button (53) to stop the AUTO DRIVE-mode. The machine can now be controlled with the
joystick again.
WARNING! Always make sure all rotating parts have come to a complete standstill before moving around the
machine.
Be careful! Make sure nobodies feet get under the wheels. Wear appropriate safety shoes when you drive the
machine to or from the work area.
50
51
52
53
41
42
45
