Grinding & Polishing
MODEL BGS-250-115-S GRINDER
SECTION 6
OPERATION
34
OPERATING MANUAL
FEBRUARY 2008
Use the following sequence to shut down the machine:
•
Press the red OFF switch (1) to switch off the motor.
•
Disconnect the extension cable from the socket and keep it in a safe place
to secure the machine from unauthorized use.
•
If the machine stays at the job site, you should cover it with a tarp to
protect it from moisture and excessive soiling.
6.2 SWITCHING OFF THE MACHINE
Figure 6.2.1
Always lay the machine down on the steering handle. If you lay
the machine down on the grinding disc, the flexible coupling
could deform, due to a combination of mechanical pressure and
heat. That could cause uneven wear of the grinding disc.
