MODEL BGS-250-115-S GRINDER
SECTION 3
GENERAL
22
Grinding & Polishing
OPERATING MANUAL
FEBRUARY 2008
Special attendance and regular maintenance of the machine are imperative for
functioning and safety.
Pay attention to unusual noises or strong vibrations. Check for the cause of every
big change. Call a technician if you have doubts about the cause or when a
repair without a technician does not seem possible without damages.
Generally, the Blastrac BGS-250-115-S requires very little attention regarding its
maintenance.
Verify that any wastes or fiber residues do not remain in the area of the grinding
disc. Never clean the machine using high pressure water jet.
When the machine is not in use, place it on the steering handle. This will prevent
deformation of the flexible coupling, due to a combination of mechanical pressure
and heat.
Before using the machine you should always verify that all bolted connections
are secure and tight.
3.7 CARE AND MAINTENANCE
Use of non-original replacement components or wear parts may void
the machine warranty.
