Blastrac BDC-1114PH CA ASBESTOS, Оригинальная инструкция по эксплуатации

Страница: 9 / 29

9
4 Commissioning
4.1 Switching on and off
The plug socket on the vacuum cleaner will always
be live when the mains plug is plugged in,
irrespectively of the position of the switch
Caution!
Electric tools and compressed air tools must be
switched off when they are connected
Information
If the switch is in the >0< position, the plug socket on the
vacuumcleaner can be used as an extension lead.
! Connection value: Vacuum c connected unit,
maximum 16 A.
▶▶
Insert the plug into socket
> 0 < Vacuum cleaner is switched off
> I < Vacuum cleaner switched on without
Shaker function
> IR < Vacuum cleaner switched on with
Automatic shaker function
>AR< Vacuum cleaner on standby
The vacuum cleaner only switches on when
the tool is switched on.
After the tool is switched off, the vacuum
cleaner runs on for approx. 10 sec to
prevent any residue from collecting
in the hose.
▶▶
Set the vacuum cleaner to the switch position >0<.
▶▶
Pull out the plug after you have finished.
▶▶
Fix the suction hose in the accessory storage
location on the back of the container for storage.
▶▶
The ends of the hose can be pushed into each
other to prevent particles of dirt from coming out.
▷▷
Push the plug of the vacuum cleaner into the
plug socket.
▷▷
Set the switch for normal operation without
shaker function to “I”
and set it to “IR” for normal operation with shaker
function and to
“AR” for standby mode.
↳↳
The vacuum cleaner is ready for suction.
▷▷
After vacuum cleaning, set the switch to “O”.
↳↳
The vacuum cleaner is switched off.
▷▷
Pull the mains plug of the vacuum cleaner out of
the plug socket.
▷▷
Secure the mains cable.
▷▷
Remove the electric/compressed air tool.
5 Operating modes
▶▶
When using the grip handle you can adapt the
suction performance by using the slider to control
access of air into the hose.
5.1 Dry vacuum cleaning
You should only use the vacuum cleaner with a dry
filter and appropriate accessories to prevent dust
from accumulating and forming encrustations.
When using the vacuum cleaner to remove soot,
cement, plaster, flour or similar dust we
recommend using fleece filter bags. Always
use filter bags in combination with folding filter
cassettes.
Information
M, H and H Asbestos class vacuum cleaners should
be preferably used as dry vacuum cleaners.
5.2 Wet vacuum cleaning
Caution!
Caution!
Selector switch for minimum material flow (horn and
light) on the vacuum cleaners:
In the modes >AR< and >IR< the following setting is
made, depending on the diameter of the hose:
Switch the vacuum cleaner off immediately if foam
or liquid starts to come out.
▷▷
Empty the container and, if necessary, clean the
folding filter cassette.
Hose inner
diameter
Selection switch
(
position 8, page 2)
Information
Ø 50 mm 35 (Blastrac dust hose)
Ø 35 mm 35 (70 m
3
/hr)
Ø 27 mm 27 (40 m
3
/hr)
No speed regulation is carried out. The vacuum cleaner
always runs at max. speed.
Clean the water level
sensors (1) regularly
and examine for signs
of damage.