Blastrac BDC-1114PH CA ASBESTOS, Оригинальная инструкция по эксплуатации

Страница: 12 / 29

12
10 Transport
▷▷
Insert the closing plug of the vacuum cleaner
into the suction aperture.
▷▷
The motor head must be securely fixed to the
container (close the latches).
▷▷
Place the accessories in a suitable plastic bag
and seal the plastic bag or place it in the tool
storage compartment.
▷▷
Plug the ends of the suction hose into each
other.(3)
▷▷
Place the hose around the vacuum cleaner and
clamp onto the handle.
Caution
Precautionary measures with vacuum
cleaners class H and M
The outside of the vacuum cleaner should be
cleaned and wiped down or should be treated with
a sealing agent before being removed from the
dangerous area. All parts of the vacuum cleaner
must be considered to be contaminated when they
are removed from the danger area and suitable
handling must be used to prevent dust distribution.
Contaminated items
When carrying out maintenance or repair work, all
contaminated items which have not been
adequately cleaned must be disposed of. Such
items must be disposed of in impermeable bags in
accordance with the applicable regulations
concerning the disposal of such waste.
Information
Testing the effectiveness of the vacuum
cleaner
NOTE: In addition, the effectiveness of the
vacuum cleaner class H must be checked at least
once a year. There must be an adequate air
exchange rate L in the room if the
exhaust air returns to the room. Further
information can be taken from your national
regulations. If the suction of the vacuum cleaner
reduces and the cleaning procedure of the folding
filter cassettes increases, the suction performance
is not adequate (provided that the container is
empty and the fleece filter bag has been replaced)
then it is necessary to replace the folding filter
cassettes.
11 Maintenance
-Switch the vacuum cleaner off and pull out the
mains plug before any maintenance work.
For maintenance by the user, the vacuum cleaner
must be
- dismantled,
- cleaned and
- maintained,
as far as possible without creating any danger to
the maintenance personnel or other.
Precautionary measures
Suitable precautionary measures include
- Cleaning before dismantling,
- Provide local filtered positive ventilation where
the vacuumcleaner is to be dismantled,
- Clean the maintenance area and
- suitable personal protection equipment.
11.1
Cleaning
Acids, alkalis and solvents can corrode the vacuum
cleaner parts.
▷▷
Clean the container and accessories with water.
▷▷
Wipe the top section with a damp cloth.
▷▷
Allow the container and accessories to dry.
11.2
Repair
DANGER! – WARNING!
▶▶
Inappropriately repaired vacuum cleaners
present a danger to the operator.
▶▶
Have repairs carried out by specialists, e. g.
customer service. Use only genuine spare parts.