Blastrac BDC-1112, Руководство по эксплуатации

Страница: 8 / 16

8
Operating manual BDC-1112 8/16
info@blastrac.eu
 The suitable precautions include decontamination before disassembling the dust
collector, adequate filtered ventilation of the exhaust air from the room in which it
is disassembled, cleaning of the maintenance area and suitable personal
protection.
 The external parts of the class M or H dust collector must be decontaminated by
cleaning and vacuuming methods, de-dusted or treated with sealant before being
taken out from the hazardous zone. All parts of the dust collector must be
considered as contaminated when they are removed from the hazardous zone and
appropriate actions must be taken to prevent dust from dispersing.
 When maintenance or repair procedures are carried out, all the contaminated
elements that cannot be properly cleaned, must be destroyed.
 These elements must be disposed of in sealed bags according to the applicable
regulations and in accordance with the local laws governing the disposal of such
material.
 This procedure must also be followed when the filters (main or HEPA) have to be
disposed.
 Compartments that are not dust-tight must be opened with suitable tools and
thoroughly cleaned.
Safety regulations
 Persons who are not operating the machine must not be permitted to stay in the
surrounding area of the machine.
 Don’t change anything on the machine. Use always cables which are approved and
safety earthed (extend) cables. The machine is always equipped with an earthed
connection, do not change this and use always earthed cables with an earthed
plug.
 Connect the main power supply cable to an installation with an earth leakage
circuit breaker.
 Inspect and test the electrical components regularly. The electrical components
have to satisfy to the requirements which apply to these components.
 Always call a skilled electrician or your distributor when you have questions about
the safety of the electrical components.
 Work on electrical equipment or operating materials may only be undertaken by a
skilled electrician or by trained persons under the guidance and supervision of a
skilled electrician as well as in accordance with the electrical engineering
regulations.

Pull out the main plug during inspections and repair operations on the machine.

Never operate the machine when the surface is wet.
 Never use the machine in the rain.