background image

 

 

 

12 

 

 

 

1.

 

Main power switch 

The main power switch is located on the control box. It has to be switched OFF before connecting the machine 
to the power supply. It has to be switched ON before operating the machine and the use of the extension lead. 
 

2 - 3 - 4. 

Control light, Buttons Compressor ON/OFF 

Pressing the green button "ON" switches the compressor on, the control light shines. Pressing the red button 
"OFF" switches the compressor off. 
 

5.

 

Control light Motor protection  

This light shines when the whole electric will be switched off due to an overload of one motor.  
 

6 – 7 – 8.  

Control light, Buttons Fan ON/OFF,  

Pressing the green button switches the fan on, the control light shines. Pressing the red button switches the 
fan off. 
 

Phase inverter switch 

This switch is located inside the control box. It is used when the phases of the power supply are incorrect.  
Set the main power switch in position "0" and open the control box door. Now you can adjust the turning 
direction of the motors with the phase inverter switch. 
 

Pressure difference gauge 

This gauge indicates the pressure difference between the clean and dirty side of the filters. Observe it to check 
the status of the filters. Replace the filters when it indicates 15cm.H2O. 
 
 
 

4.4 

Transport 

 
Please read chapter 3.7 “Transport safety” 
Be careful! Make sure nobodies feet get under the wheels. Wear appropriate safety shoes when you drive the 
machine to or from the work area.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Make sure that no vehicles, such as forklift trucks and other equipment run over the electric cable and the dust 
hose. 
 
The machine should only be moved around when the dust hose, and power supply cable are disconnected. 

WARNING! 

Always make sure all rotating parts have come to a complete standstill and there is no more 

pressure in de air tank before moving the machine around. 

Remove  the  dust  from  the  dust  collector  before  it  is  transported.  The  dust 
collector  may  only  be  lifted  by  using  the  lifting  points.  The  weight  and 
dimensions of the dust collector are shown in the chapter "Technical data“.

 

Содержание 854 DCS






















Отзывы: