DRD 700 Quad Multistream Processor
Rev. D
www.blankom-digital.de
Page 9 (26)
Requests for status and logbook entries are allowed without login. Click the logout button to exit the
configuration mode after the device is configured so as to avoid unauthorized access to the device. If no
further entries are made, the system automatically exits the configuration mode. The fallback time can be
adjusted by the user (
User Accounts
).
Input
Input allows the selection of the sources of the transport stream for further processing. The source of the
transport streams can be either ASI, IP or different DVB frontends if assembled. A click on the particular
transport stream number gives more status information about selected source .
IP Input (option):
The input source “IP” is accessible if this option is activated. IP 2 is configurable if the redundancy option is
activated and a SFP modul is inserted.
Max. four MPTS/SPTS transport streams can be received via IP input. By using IGMPv.3 the source port IP
address can be specified (SSM: Source Specific Multicast).
Standard data protocol is UDP
.
The selected data protocol must correspond to the IP source protocol!
In the
same manner the IP address and the port channel of the source must match. Multicast is possible by
selecting the corresponding IP addresses. Addresses in the range 225.x.x.x to 232.x.x.x and 234.x.x.x to
238.x.x.x are reserved for Multicast transfer (one source, multiple recipients).
