4
LANIOS-RCL •
Part no. 5161.20 / 5161.21
• Ethernet switch
1. Savety and operating instructions
When assembling, starting-up and adjusting the modules, it is necessary to consider the system specific references
in the instruction manual.
The modules may only be installed and started up by authorized technical personnel. Only the mounting styles
described in the Quick Start Guide are supported.
When installing the modules into the receiving points, the adherence of the EMC regulations is to be ensured.
The assembly and wiring have to be done without voltage. For installation, only the supplied accessories (DIN rail
clip with screws and 19“ accessories) may only be used.
All active modules may only be powerd by the power supplies of the HELIOS family, HELIOS-P1 or QUASARIOS.
Only connect the module with the accessory cables provided.
The mains voltage and the operating voltage of the modules working by DC have to be in compliance with the
operating parameters described in the technical data.
With all work the defaults of the DIN EN 50083 have to be considered. It is especially important to follow
DIN EN 60728-11.
The unit must only be mounted vertically. The ventilation slots as well as the circulation perforation of the
modules is not be obstructed in any way.
If installed in mounting cabZinets a adequate heat circulation must be guaranteed. The mounting in closed
cabinets without air sufficient flow is not allowed.
For DIN rail mounting is important to note that between the heat sink and a neighboring module, a distance of
0,79" is required. If the modules mounted on top of each, so they must be spaced 7.87" apart.
For 19“ mounting all devices in the rack must be fitted with 19“ Edge Guide. Mounting the device using only the
screw holes at the front panel is insecure and discouraged. Furthermore, the operation of a fully occupied rack is
only allowed with an underlying 1-U fan box (at least 3 fans, 6,93" deep).
2. Device variants
LANIOS-RCL
5161.20
8-fold Ethernet switch with remote connection and RS 232 interface
(3 pole stereo jack-TRS)
LANIOS-RCL
5161.21
8-fold Ethernet switch with remote connection and RS 232 interface
(9 pole D-subminiature)
3. Software options
CKB 200
5100.50
activation SNMP v3
4. General
The Smart Business Line (SBL) is a modern headend system, that is distinguished by its modular and compact design. A
userfriendly operating concept facilitates setup, configuration and maintenance of the system.
The LANIOS-RCL is the 8-fold Ethernet switch with remote connection created for the SBL system. The integrated modem
supports the communication via LTE, UMTS and GSM/ GPRS.
WEEE-Reg.-Nr. DE 50389067
Содержание 5161.20
Страница 2: ......
