21
A-PALIOS-IPM4
Part N
o
: 5105.82
8 pole IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
ATV (8x AM)
A
LINE
8. Factory settings
A short pressing of the reset button on the rear of the device causes a reboot, i.e. the device restarts and all stored values are
adjusted. If the device is to be reset to factory settings, the reset button must be pressed so long to keep up until the “POWER“ and
“SYSTEM“ LED will illuminate green permanently. This process takes about 15 seconds. In this case the device is set to the following:
Input parameters
Output parameters
Setup settings
Network settings