19
A-PALIOS-IPM4
Part N
o
: 5105.82
8 pole IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
ATV (8x AM)
A
LINE
7.2.7 Menu ”Service”
In this menu you will find all information about the service for the A-PALIOS-IPM4 device in particular the BLANKOM service hotline
and the service email address. In addition, the implemented operating instructions may be downloaded or viewed as PDF. If there is
an Internet connection the BLANKOM homepage can be started, offering the latest software release or descriptions. Finally, the cur-
rently installed software release is displayed.
7.2.8 Menu ”Level”
With the top box, the loop through output (loop) is enabled or disabled. If enabled, the underlying selection of the nominal level for
all 8 channels may be set in the range from 62 ... 82 dBµV. If the loop is disabled, the output level of the 8 channels may be set in the
range of 76 ... 94 dBµV. Below each channel can be set individually with an offset of +3 ... -6 dB in 0.5 dB steps. The three lower but-
tons are used to simplify the offset level setting if you want to perform same adjusting for all 8 channels. With the left button the offset
for all 8 channels is increased by 0.5 dB, decreased with the right button by 0.5 dB. The offset is set for all 8 channels to 0 dB with the
middle button.