13
Further you can select, in which priority (low, middle or
high) the transfer of services is done. Due to the dynamic
transmission rate of the services the brutto bitrate of the
channel could be exceeded. This could lead to malfunctions
up to total failure of services. In this case, services with
the lowest priority are restricted, so that the ongoing
transmission of high-priority services is trouble-free.
If you choose too much services for transmission the brutto bitrate could be exceeded. This is indicated by a red LED
in front of the channel. Read in the “
Status
“ menu (»
chapter 7.3.9
) the output parameter (overflow bitrate > 0 MBps).
The number of services to be transmitted must be reduced until the channel bitrate does not exceed the brutto bitrate
(overflow bitrate = 0 MBps) anymore.
The
“i“ button
gives an overview of the assignment of the 16 output channels. The transmitted programs are listed per
channel, specifying their name, service ID and name of the transponder from which the transmitter was taken.
