BLADEZ PB-SM1816, Руководство по продукту

Страница: 10 / 16

Page 10
RIDING
Before going for a joy ride, makes sure that all of the bolts and screws are tightened.
Put switch to the ON position, green light will come on indicating the unit is turned on
with full charge. (Fig. 11)
NOTE: If the unit is at the ON position for over 10-
15 minutes without moving, Smart Power will shut
the unit OFF. To reset, turn the unit OFF, wait a
few seconds and then switch it back ON again.
Put one foot on the deck of the XTR-Street II. While pushing off with the other foot,
gently squeeze the ACCELERATOR LEVER, on the right side of the handlebars. The
XTR-Street II will begin to move on its own power.
Your XTR-Street II comes with a variable speed throttle. You can control your speed by
the amount of pressure you use to depress the throttle cable. The more you depress the
throttle lever the faster you will go.
To stop, release the accelerator handle and depress the BRAKE LEVER (on the left
side of the handlebars). Depressing the brake will disengage power to the motor.
When the unit feels like it is losing power, or not accelerating to full speed you are ready
to RECHARGE.
*NOTE: At this time, there is still charge in the battery but it is not advisable to fully
discharge the batteries.
FOLDING AND STORAGE
When you are done riding the XTR-Street II you can fold it down for compact storage,
carrying and transportation. Make sure the POWER SWITCH is in the OFF position and
the charger is unplugged from the socket.
Always charge your POWERBOARD fully prior to storage!
To fold down the XTR-Street II, use one hand to pull
back on the FOLDING HANDLE, while using the other
to gently pull down on the handlebars. (Fig. 12) BE
CAREFUL NOT TO HIT YOUR HEAD WITH THE
HANDLEBAR. Push down until you feel the
mechanism lock into place.
Fig.12
Fig. 8