Operation of the Monitor
Getting familiar with the control panel
12
XLG EXERCISE COMPUTER-
2007 K/M
SPECIFICATIONS
:
TIME………………………………………………… .…..…00:00-99:59 MIN:SEC
SPEED………………...…….……………………… ..…0.0- 999.9KM/H or ML/H
DISTANCE…………………………………………...………....0 - 999.9 KM or ML
CALORIES………………………………………………… .…….…0- 999.9KCAL
KEY FUNCTIONS:
MODE: To select a desired function. Hold the key for 4 seconds to have all function values
reset to zero (0) - total reset
SET: To input the target value.
RESET: To let the value reset.
KM/ML SWITCH
：
Switch the unit to KM or ML
.
OPERATION PROCEDURES:
AUTO ON/OFF
To conserve power, the monitor will automatically shut off if there is no speed signal sensed
or no key pressed in 4 minutes. The monitor will be auto-powered when the exercise begins
or at any key press
<1> TIME
Displays work out time lapse while exercising.
<2> SPEED
Displays the current speed.
<3> DISTANCE
Accumulates the distance while exercising.
<4> CALORIES
Displays calories consumed while exercising.
<5> SCAN
Scans through each function between: TIME-
SPEED-CALORIES-DISTANCE.
BATTERY
If there is an improper display on the monitor, Please
replace or change for new batteries. This monitor uses
two “AA” batteries. Always replace both batteries at the
same time.
1) Remove batteries then set the switch to
ON(
) for Mile or OFF(
) for KM
2) Install batteries
Follow the steps below to change measurement unit to English or metric
