EN
6
Rudder
Rudder left
Rudder right
Understanding the Primary Flight Controls
If you are not familiar with the controls of your quadcopter, take a few minutes to familiarize yourself with them before
attempting your fi rst fl ight.
Throttle
Throttle down
Throttle up
Left Side View
Left Side View
Descend
Climb
Nose Yaws Left
Nose Yaws Right
Elevator
Forward
Elevator down
Elevator up
Backward
Left Side View
Left Side View
Aileron
Aileron left
Left
Aileron right
Right
Rear View
Rear View
To bind or re-bind your quadcopter to your chosen transmitter, follow the directions below.
Transmitter and Receiver Binding
If you encounter problems, obey binding instructions and refer to the troubleshooting guide for other instructions. If needed, contact
the appropriate Horizon Product Support offi ce. For a list of compatible DSM
®
transmitters, please visit
www.bindnfl y.com
.
Failsafe
The included receiver does not have failsafe capabilities. Failsafe is detected at the fl ight controller. In the event of a loss of signal
to the receiver the fl ight controller will cut power to the motors to prevent a fl y-away situation.
Binding Procedure
1. Select the correct model in your transmitter.
2. Power off your transmitter.
3. Lower the throttle fully.
4. Power the quadcopter on while pressing the bind button located on the left side of the fl ight con-
trol board, as shown in the illustration. Do not press the button on the right side of the fl ight board.
5. Follow the procedures of your specifi c transmitter to enter Bind Mode.
6. The receiver LED glows solid orange indicating binding was successful.
