14
EN
1
6
8
9
10
28
24
11
11
12
22
18
20
21
17
19
19
16
15
16
9
27
25
23
26
13
14
27
7
7
5
2
4
3
Exploded View
Problem
Possible Cause
Solution
Drift in calm winds
Vibration, damaged linkage, dam-
aged servo
Under normal operation the transmitter trims should not
require adjustment and the center positions are memorized
during initialization. If you fi nd that trim adjustments are nec-
essary after take off, verify the balance of all rotating compo-
nents, ensure the linkages are not damaged and make sure
the servos are in proper working condition.
Drift in wind
Normal
The model will drift with the wind but should remain level in
fl ight. Simply hold the cyclic stick in the necessary position
to keep the model stationary. The model must lean into the
wind to remain stationary, if the model remains level then it
will drift with the wind.
Panic Recovery or Return to
Level does not level the model
Model was not initialized on a level
still surface
Re-initialize the model on a level and still surface.
Model was not taken off of a level
surface
Always lift off from a level surface.
Severe vibration
Rotating component out of balance
Check the main shaft, tail rotor, main rotor blades, main
frame and adapter for damage, replace as necessary. Vibra-
tion must be minimized for Panic Recovery and Return to
Level functions to work properly.
