BlackVue DR490L-2CH, Руководство пользователя

Страница: 17 / 72

DR490L-2CH
17
10
Connect the red [B +] wire to a Constant Power fuse.
Identify a Constant Power (battery power) fuse in your fuse panel. Typical
Constant Power fuses are the hazard light (emergency lamp), tail lights and interior light fuses. If your car has a “Battery Saver
Function” please utilize the hazard light fuse.
Remove the identified Constant Power fuse. Remove the sleeve from the end of the red [B +] wire, and wrap the wire around one of
the blades of the Constant Power fuse. Reinsert the fuse back into the fuse panel.
11
Connect the black [GND] wire to a ground point. Locate a ground point, such as a bolt, that is directly on a bare metal part of the
vehicle's frame. Secure the ground wire to the bare metal frame (for example by securing it under the bolt).
12
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the hardwire cable.
Hardwire cable installation:
Rear camera connection cable
Hardwire cable
Fuse panel