16
BLACKVUE
8
To record in parking mode you must hardwire the dashcam to your car’s fuse panel using the hardwire cable.
Normal mode
and event mode will also be available while driving. Plug the
hardwire cable
into the DC-IN port on the front camera. Proceed to
Step I.
Alternatively, if you power the dashcam from the cigarette lighter socket you will not be able to record in parking mode.
Normal mode and event mode will only be available while driving. Plug the
power cord
into the cigarette lighter socket and the
DC-IN port on the front camera. Proceed to Step L.
9
Connect the yellow [ACC] wire to a Switched fuse.
Referring to your vehicle Owner's Manual/Handbook, identify a Switched
(accessory power) fuse in your interior fuse panel. Typical examples are the cigarette lighter and car stereo fuse slots.
Remove the identified Switched fuse. Many cars come with a fuse puller tool in the engine compartment fuse panel.
Remove the sleeve from the end of the yellow [ACC] wire, and wrap the wire around one of the blades of the Switched fuse. Reinsert
the fuse back into the fuse panel.
GND (Black): Connect to ground point
B + (Red): Connect to
Constant Power fuse slot
ACC (Yellow): Connect to Switched fuse slot
Содержание DR490L-2CH
Страница 1: ...ENGLISH DR490L 2CH Manual ...
Страница 72: ...DR490L 2CH ...