BLACKMER NGH1013, Инструкции по установке, эксплуатации и обслуживанию

Страница: 14 / 32

MAINTENANCE
CB6A-210 page 14/32
SERVICE SCHEDULE
Daily Weekly Monthly 6 Months Yearly
Overall Visual Check X
Check Crankcase Oil Pressure X
Check Suction Pressure X
Check Discharge Pressure X
Drain Distance Piece X
Drain Liquid From Accumulation Points X
Clean Compressor Cooling Fins X
Check Crankcase Oil Level * X*
Check Mounting and Anchor Bolts X
Check V-Belt Tension X
Change Oil and External Oil Filter * X*
Grease VVCP Adjustment Screw X**
Check Inlet Filter/Strainer Element X
Inspect Valves X
Lubricate 4-way Valve X
Lubricate Motor Bearings per Manufacturer's Suggestions X
Inspect Motor Starter Contact Points X
* Change oil every 1,000 hours of operation, or every 6 months whichever occurs first. If the oil becomes dirty or diluted,
change oil and external filter as often as needed to maintain clean oil.
**If VVCP option is present, Grease Piston Rod (Adjustment Screw) when changing Crankcase oil.
Table 5 - Service Schedule
TOOL LIST
Description Used For:
Blackmer Piston Nut Crossbar (Part # 798024)
Blackmer Piston Nut Socket Tool (Part # 798025)
Blackmer Piston Nut Socket Tool (Part # 798026) Piston Lock Nut 6.0” and 3.25” Cylinder
Piston Lock Nut 6.0” Cylinder
Piston Lock Nut 3.25” Cylinder
Blackmer Packing Installation/Removal Tool (Part # 797049) Rod-Packing protection during installation.
1/2” Drive 6” Extension Piston Lock Nut
3/8”, 1/2”, 5/8”, 12 Point Drive Sockets Main Bolting, Bearing Carrier, Packing Bolts
100 ft*lb 3/8” Drive, 250 ft*lb ½” Drive Torque Wrench Torqueing All Bolts
Feeler gauges or Depth Micrometer Piston Clearance
Allen Wrenches: 3/16", 1/4”,5/16” Oil Pump Cover, NPT Fittings
Screwdriver, Flat Blade Nameplate screws
Rubber Mallet
Arbor Press Wrist Pin Removal
Bearing Puller Crankshaft Bearings
Hoist (useful) Major Components
Non-marring Wedge Connecting Rod Removal
Non-marring Punch Connecting Rod/Wrist Pin Removal/Installation
10” Crescent Wrench
10” Pipe Wrench
Loctite Anti-Seize (non-copper)
O-Ring Lubricant (Parker) O-Rings
Table 6 - TOOL LIST