BLACKMER HD172A, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 24

CB-9A-040 page 2
GENERAL INFORMATION
COMPRESSOR DATA
Air
Cooled
Air
Cooled
Water
Cooled
Air
Cooled
Water
Cooled
Double-Seal Mode
Triple-Seal Mode
HD172A HD372A
HD373A
HDL372A
HDL373A HD612A
HD613A HDL612A
HDL613A
Displacement
@ 350 rpm - CFM (m
3
/hr)
@ 825 rpm - CFM (m
3
/hr)
3.57 (6.070
8.42 (14.3)
10.2 (17.3)
26.1 (40.8) 22.9 (38.9)
53.7 (91.2)
Max. BHP (kw)
10 (7.5)
15 (11) 40 (30)
MAWP - psia (kPa)
615 (4,241)
615 (4,241) 415 (2,862)
Max. Discharge Temp.
350
°
F (176
°
C)
NOTE: Reduce maximum speeds by 9% for continuous duty operation.
The models listed above are two-stage, vertical, air-cooled or water-cooled reciprocating style compressors with
single acting cylinders. Three basic sizes are offered. Double or triple seal arrangements are available.
Before proceeding, you should:
1. Note the nameplate data in the space provided above.
2. Obtain the appropriate parts lists for the model in question.
3. These compressors are used on a wide variety of gasses. Before doing any work on the
compressor, be certain of the identification of the gas and the precautions to be followed when
around that gas.
NAMEPLATE DATA
A nameplate is attached to the
side of all Blackmer compressors
showing the Model No., I.D. No.,
and Serial No. These numbers
should be available when
information or parts are needed
for a particular unit.
Model No. Indicates the basic size and type of the compressor. A suffix letter is used on most models to
indicate the version.
I.D. No. An 11 character code identifies the construction of the compressor. A key to the I.D. Number is found
on the next page.
Serial No. 6 digits and a suffix letter indicating the year of manufacture.
Suffix L M N P Q R S
Year 1991 1992 1993 1994 1995 1996 1997