Blackmagicdesign HDLink Optical Fiber, Руководство по эксплуатации

Страница: 22 / 45

Installation
22
HDLink Optical Fiber
22
HDLink Optical Fiber features an indicator lamp to show the operational status of the unit:
‚
Off HDLink Optical Fiber is powered off.
‚
Dim HDLink Optical Fiber is powered on but is not receiving a valid SDI video signal via either
SDI or Optical Fiber SDI inputs.
‚ Bright HDLink Optical Fiber is powered on and is receiving a valid SDI video signal via either or both
SDI and Optical Fiber SDI inputs.
Valid video signals supported by HDLink Optical Fiber include 2K, HD1080, HD720, NTSC and PAL.
Computer video formats are generally not supported unless they coincidentally match a TV format. HDLink
can be used to monitor the output of a Blackmagic Design DVI Extender in either Video or Extender
(computer resolution) modes. Detailed information is available in the DVI Extender manual. Please see the
following HDLink specifications link for a full listing of current formats supported via DVI and HDMI displays.
www.blackmagic-design.com/products/hdlink/techspecs/
HDLink is preconfigured for you, requiring no initial setup to connect. Your HDLink will simply run without
changing any settings, however, if you would like to update the firmware, modify settings or load custom
gamma tables, then use the HDLink Utility software. This can be downloaded from the Blackmagic Design
web site support page. Check
www.blackmagic-design.com/support/
HDLink Optical Fiber uses the same software as other HDLink models and shares the same software
interface for changing settings including 3D LUTs. 3D and 1D lookup tables can be applied to the DVI/
HDMI output of HDLink Optical Fiber. If HDLink Optical Fiber is configured to send lookup tables to all
video outputs, the lookup tables will be applied to both the SDI and optical fiber SDI outputs in addition
to the DVI/HDMI output.
DVI-D monitors are shown in most of the connection diagrams shown for this HDLink model. An HDMI
display can be used in all cases except for 2K monitoring as HDMI displays do not have sufficient resolution
to display a full 2K image. HDMI displays are best for use with HD720p50 as most DVI displays do not
support this format. The included DVI-to-HDMI adapter can be used to attach an HDMI display to the DVI
output of HDLink.
HDLink Optical Fiber provides SDI and optical fiber SDI inputs which can be used for standard definition
SDI, HD-SDI 4:2:2, 3 Gb/s HD-SDI 4:4:4 video or 2K film.
The fiber optic module, included with HDLink Optical Fiber, is a standard SFP transceiver module which
includes an LC connector port for attaching fiber optic cables. While other kinds of optical connectors exist,
the SMPTE standard for Optical Fiber SDI specifies that LC type optical fiber connectors be used and this
makes it easy for all SMPTE compliant optical equipment to connect together.
The consumer level analog audio outputs are fully compatible with a wide range of consumer HiFi
equipment and are perfect for monitoring of stereo audio or even up to 6 channels of audio. 2 channel
audio output via HDMI is provided for maximum compatibility with HDMI TVs and monitors.
USO
RESTRITO