Figure 1 - Model BH6025 Components
SAVE THESE INSTRUCTIONS
For your safety,
read, understand, and follow
the information provided with and on this jack. The owner and operator
of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use.
The owner and operator shall be aware that use and repair of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in the operator's native language before use of this jack is
authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use.
Do not use if there are broken, bent, cracked, or damaged parts (including labels). Any
jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately. If the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use until jack has been checked by a Blackhawk authorized service
center. It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals
are available from manufacturer.
PRODUCT DESCRIPTION
Blackhawk Hydraulic Service Jacks are designed to lift,
not
sustain, rated capacity loads. They are designed to be
used in conjunction with jack stands.
Intended use:
To lift one wheel or one axle of a vehicle for the purpose of service
and/or repair of vehicle components. After lifting, loads must be immediately supported by appropriately rated jack
stands. Check with vehicle owner's manual for proper lift points. Always refer to the Product Label and Operator's
Manual to establish rated capacity.
3
SPECIFICATIONS
2 1/2 Ton
5 1/2"
Model
Capacity
Jack Size ( L X W X H )
Min. Height
Max. Height
25 3/8" x 13 1/8" x 6 1/2"
5 1/2"
19 1/2"
BH6025
27 1/2" x 13 3/8" x 6 3/8"
19"
BH6034
3 Ton
Saddle
Handle
Foot Pedal
Caster
Lifting Arm
Oil Filler Plug
( on reservoir )
Handle
Fork
Handle
Saddle
Lifting Arm
Oil Filler Plug
( on reservoir )
Caster
Figure 2 - Model BH6034 Components
Release Valve
Release Valve
