User Manual 3D-Printer
Version 2018-3.1_ENG
45
17.
Turn the base unit back on its feet
[24]
a.
Make sure the belt is between the guiders!
Follow instructions in Chapter 5.6 for the belt calibration before continuing this guide.
18.
Put the gantry back on the base unit and mount it in 45° position with the 2 angle adjusting knobs [25]
19.
Mount the 2 screws at the hinge back again.
[26]
20.
After a belt change you’ll need to calibrate the Y axis
as explained in chapter 5.5.
19
20
0
21
22
23
24
0
