User Manual 3D-Printer
Version 2018-3.1_ENG
30
-
Control
Back to the previous screen
-
Nozzle:
Set temperature printhead
-
Bed:
Set temperature heated bed (belt)
-
Fan Speed 1:
Set fan speed (0= off, 255=full power)
-
Fan Speed 2:
Set fan speed rear fan (0= off, 255=full power)
-
Autotemp:
Function, to adapt the temperature of the printhead
automatically to the print speed.
-
Min:
Minimal temperature for slow print moves
-
Max:
Maximal temperature for fast print moves
-
Fact:
Normal print temperature
-
PID-P:
Set values for de heat-up speed of the printhead
-
PID-I:
-
PDI-D:
-
PID Autotune:
Automatically generate values for the heat-up speed of the
printhead
-
Motion
Control Motion settings here (only advanced users)
-
Control
Back to the previous screen
-
Velocity
Allows you to change maximum Velocity Values.
-
Motion
Back to the previous screen
-
Vmax X:
Set max speed for the X axis in mm/s
-
Vmax Y:
Set max speed for the Y axis in mm/s
-
Vmax Z:
Set max speed for the Z axis (belt) mm/s
-
Vmax E:
Set max speed for the Extruder in mm/s
-
Acceleration
Allows you to change maximum Acceleration Values.
-
Motion
Back to the previous screen
-
Amax X:
Set maximum acceleration of the X axis in mm/s
-
Amax Y:
Set maximum acceleration of the Y axis in mm/s
-
Amax Z:
Set maximum acceleration of the Z axis (belt) in mm/s
-
Amax E:
Set maximum acceleration of the Extruder in mm/s
-
Jerk
Allows you to change maximum Jerk Values.
-
Motion
Back to the previous screen
-
Vx-jerk:
Set maximum start speed the X axis in mm/s
-
Vy-jerk:
Set maximum start speed the Y axis in mm/s
-
Vz-jerk:
Set maximum start speed the Z axis (belt) in mm/s
-
Ve-jerk:
Set maximum acceleration of the Extruder in mm/s
-
Steps/mm
Allows you to change the stepper motor steps per mm.
-
Motion
Back to the previous screen
-
Xsteps/mm:
Set the steps per mm for the X axis
-
Ysteps/mm:
Set the steps per mm for the Y axis
-
Zsteps/mm:
Set the steps per mm for the Z axis (Belt)
-
Esteps/mm:
Set the steps per mm for the Extruder
-
Restore Failsafe
Resets the original settings of the machine
-
Print from SD
Choose a file from the SD card
-
Main
Back to the previous screen
