manualshive.com logo in svg

Black BLK-HDPTZ12, Руководство пользователя

Поделиться
Скачать
Black BLK-HDPTZ12 Скачать руководство пользователя страница 5

v

2MP 12X PTZ HD-SDI/HDcctv Dome Camera

PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS

Precautions

• 

Any changes or modifications to this camera which are not expressly approved by the party responsible for compliance could void 
the user’s authority to operate the camera. 

• 

A regulated 24 Vac 2.5 A power supply is recommended for use with this camera for best picture and the stable operation. An 
unregulated power supply can cause damage to the camera. Any use of an unregulated power supply will void the product 
warranty.

• 

Use this camera with a CCTV quality monitor with a 75 Ω input impedance. If your monitor is configured for high impedance, 
then adjust it accordingly before connecting the camera to it. 

• 

Never point the camera towards the sun or any bright or reflected light. Very bright light may cause smear on the picture and 
possible damage to the camera imager.

• 

Do not remove the product label. It is important for warranty service. 

Important Safety instructions

• 

Read and follow the instructions contained manual. Keep this manual for future reference. 

• 

Heed all warnings.

• 

Clean only with dry cloth.

• 

Do not block any ventilation openings. Install in accordance with the instructions included herein.

• 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers).

• 

Protect the power cord from being walked on or pinched.

• 

Only use attachments and accessories specified by your dealer.

• 

Use only with the cart, stand, tripod, or bracket specified by the manufacturer or sold with the camera. When a cart is used, 
use caution when moving the cart/camera combination to avoid injury from tip-over.

• 

Unplug this apparatus during lightning storms or when unused for long periods of time.

• 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus is damaged, such as a faulty power 
supply cord or plug, or objects have fallen into the unit, it does not operate normally, or has been dropped.

Содержание BLK-HDPTZ12





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды