background image

2

PASSIVE ARMING

The passive arming feature allows the system

to automatically arm after closing all doors.

The Passive Arming feature requires the

ignition to have been on for at least 10

seconds prior to exiting the vehicle. This

enables the key to be turned on then off

quickly to avoid passive arming in the event

of refueling, washing the vehicle, etc.

The

Passive Arming feature may be enabled during

installation.

To arm the system passively:

1. Turn the ignition key off (make sure

ignition was on for at least 10 seconds).

2. Exit the vehicle and close all doors.

• The LED flashes rapidly indicating that

the system is preparing to arm. (The

system can be armed at any time by

pressing transmitter button 1.)

• If the optional countdown feature is

programmed, the siren will chirp

every 2 seconds until armed.

• The siren will chirp 30 seconds after

the last door is closed to indicate the

system is armed. NOTE: Opening the

hood/trunk or a door resets the

passive arming timer.

• The doors will lock.†*

If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter

button 2.

• The siren will chirp twice.
• The parking lights will flash twice.*
• The doors will unlock.†*
• The dome light will turn on for 30

seconds.*

If the Passenger Unlock Feature is installed,

pressing the unlock button will unlock only the

driver's door. Pressing the unlock button again

unlocks all doors.

TAMPER ALERT

If the alarm was triggered while away from

the vehicle, the siren will chirp 3 times and

the parking lights will flash 3 times on

disarming for tamper indication. After

disarming the alarm, enter vehicle and turn

ignition on.The LED will flash the zone that

was triggered 3 times (see

LED TAMPER

ALERT INDICATIONS

).

AUTO REARM 

The Auto Rearm feature allows the system

to automatically re-arm itself and lock the

doors* in the event the system is disarmed

and a door is not opened within 30

seconds. This programmable feature may

be enabled during installation.

SILENT ARMING/DISARMING

Press transmitter button 5 (the Shift

Button) then the Arm or Disarm button for

one-time silent operation.The system can

also be programmed for full-time silent

operation during installation.

IGNITION LOCK*

The ignition locking feature automatically

locks the doors 5 seconds after the ignition

key is turned on, and automatically unlocks

when the ignition key is turned off. To avoid

locking keys in the vehicle, the ignition

locking feature will be cancelled if a door is

open when the ignition is turned on.

This

feature may be disabled during installation.

*

Optional feature 

REMOTE PANIC

In the event of an emergency (PANIC)

situation, the system’s siren can be triggered

for 30 seconds to attract attention.To activate

the Panic Feature, press transmitter button 1

for 3 seconds:

BW3750 new size.qxd  4/14/2004  9:09 AM  Page 2

Содержание BW 3750













Отзывы: