background image

4

Passive

. When selected, the anti-carjacking

feature will activate whenever a door is

opened while the ignition is on. Press the

valet switch 3 times to deactive the Passive

carjack feature.

Full-time

. When selected, the anti-carjacking

feature will automatically activate each time

the ignition is turned on. Press the valet

switch 3 times to deactive the Full-time

carjack feature.

If the carjack feature is triggered:

• The parking lights will flash two times.
• 90 seconds later the parking lights will

flash, the horn will honk, and the siren

will sound for 5 minutes.

• The starter kill will turn on and remain

on until the carjack feature is

deactivated.

TRANSMITTER FUNCTIONS

Button 1 Arm; press 3 seconds for panic
Button 2 Disarm; press twice for optional

Passenger Unlock feature

Button 3 Auxiliary function 1
Button 4 Auxiliary function 2 

Transmitter Functions with Shift Key

(Button 5) pressed 1 time:

Button 1 Silent Arm
Button 2 Silent Disarm
Button 3 Auxiliary function 3
Button 4 Car Locator feature (flashes

parking lights, chirps siren, and honks horn

5 times)

Transmitter Functions with Shift Key

(Button 5) pressed 2 times:

Button 1 Arm car 2; press 3 seconds for

panic

Button 2 Disarm car 2; press twice for

optional Passenger Unlock feature

Button 3 Auxiliary function 1 for car 2
Button 4 Auxiliary function 2 for car 2

Transmitter Functions with Shift Key

(Button 5) pressed 3 times:

Button 1 Silent Arm car 2
Button 2 Silent Disarm car 2
Button 3 Auxiliary function 3 for car 2
Button 4 Car Locator feature for car 2

STATUS INDICATOR (LED)

FUNCTIONS

On Solid = Valet Mode

Slow Flash = System Armed

Rapid Flash when disarmed =

Passive Arming

Rapid Flash when armed =

Tamper Alert

On Solid when not in valet =

Open Zone

LED TAMPER ALERT

INDICATIONS

(after turning on ignition)

1 Flash = optional sensor 

2 Flashes = shock sensor

4 Flashes = door

5 Flashes = hood or trunk

Example: flash-flash-pause-

flash-flash-pause = shock

sensor

PARKING LIGHT

INDICATIONS

1 Flash = System Armed

2 Flashes = System Disarmed

3 Flashes = Tamper Alert 

4 Flashes = Open Zone

Indication (after arming)

5 Flashes = Warn Away

On Solid = System Disarmed

(optional programming for 30

second output on disarm)

BW3750 new size.qxd  4/14/2004  9:09 AM  Page 4

Содержание BW 3750













Отзывы: