Black Widow Security BW X-Z Скачать руководство пользователя

Страница: 9 / 24

REMOTE TRANSMITTER LAYOUT

Each LCD transmitter button has two

operating modes: standard and level shifted.

Pressing a transmitter button for less than one

second activates the standard function

associated with that button (such as arm or

disarm). Pressing a button for more than one

second activates the level shift feature, then

plays a chime and vibrates to signal the level is

shifted. While the transmitter is level shifted,

pressing transmitter buttons 1-4 accesses

another level of commands providing expanded

operation.

The basic operation of the optional 2-way LCD

transmitter is the same as the standard 4-

button transmitter, with a few added features.

The built-in LCD display provides visual

confirmation of system operations and status.

After a function such as arming is selected, the

LCD display will show confirming icons to

indicate that the function has taken place.

Additionally, the LCD display shows any

intrusion attempts as they occur, and indicates

the triggered zone. In addition to LCD display,

the 2-way transmitter also provides audible and

vibration alert in case the display is out of view.

And, for night-time use the LCD is equipped

with a backlight feature which is activated by

pressing button 5.

SYSTEM STATUS RECALL

Real-time system status can also be recalled at

any time by pressing transmitter button 3 for

less than one second. The system’s current

status will be shown on the LCD display.

RANGE INDICATION

The LCD display has an antenna icon that

flashes every 4 seconds while the system is

armed, to indicate the transmitter is in-range of

the vehicle. 60 seconds after disarming the

antenna icon will stop flashing.

If the

transmitter is not in-range of the vehicle when

pressing a button, a low pitched audible alert

will be heard.

LOW BATTERY

When the transmitter battery is in need of

replacement, the display will show the battery

icon. Replace with a fresh AAA alkaline battery.

BUTTON LOCK

The transmitter is equipped with a button lock

feature to avoid accidental feature activation

while in a purse or pocket. To lock the buttons

press button 1 and button 5 together. To

unlock the buttons press button 2 and 5

together.

5-Button 2-way

LCD Transmitter

OPTIONAL 2-WAY TRANSMITTER WITH LCD DISPLAY

OPERATING INSTRUCTIONS

Button 1

Button 3

Button 2

Button 4

Button 5

7250 rev 2 9-23.qxd 9/24/2004 12:54 PM Page 9

Содержание BW X-Z

























Результаты поиска

Содержание BW X-Z

Отзывы:

Похожие инструкции для BW X-Z

Бренды по названию

Популярные бренды

Black Widow Security BW X-Z, Системное руководство

Результаты поиска

Содержание BW X-Z

Отзывы:

Похожие инструкции для BW X-Z

Бренды по названию

Популярные бренды