Black Widow Security BW X-Z Скачать руководство пользователя страница 7

Страница: 7 / 24

To resume driver control:

1. Unlock the doors by pressing transmitter

button 2.

2. Turn on the ignition.

• The vehicle resumes driver control,

when the brake pedal is pressed.

AUTO COLD START

This feature allows the system to start and run

the vehicle every 1, 2, 4, or 12 hours (selectable

by your installer) in a 24 hour period.This

allows the engine to remain at an operational

temperature in extremely cold weather. Auto

Cold Start interval timing must be chosen

during installation.

Engaging the Auto Cold Start feature:
To turn Auto Cold Start on:

1. Press and hold the brake pedal.
2. Press and hold button 2 for level shift.
3. Press button 1.
4. Release the brake pedal.

• The vehicle will start and run the first

interval to confirm cold start activation.

Use the Remote Engine Shutdown procedure

before first run cycle is completed. The Auto

Cold Start feature will remain engaged and

start at the pre-programmed intervals.
NOTE: The Auto Cold Start feature is not

compatible with manual transmission vehicles.

Disengaging the Auto Cold Start feature:
The Auto Cold Start feature can be deactivated

by pressing the brake pedal.

SAFETY FEATURES

The System will not start the vehicle if the

brake pedal is pressed or the hood is open.

Also, if the brake is pressed or the hood is

opened while remote running, the remote start

will shut down.

MANUAL TRANSMISSION MODE

On manual transmission vehicles, the remote

start feature will not operate unless the proper

vehicle exit sequence is performed. This

operating mode protects against in-gear

starting but is not completely without risk.

Installation and safe use of the remote start

feature on a manual transmission vehicle is at

the sole risk of the vehicle’s owner, and the

manufacturer assumes no liability for

installation in manual transmission vehicles.

Manual Transmission Safe Mode Exit Sequence:

With the engine running and the parking brake

set, press the unlock button. Turn ignition off

(engine will stay running) and open the doors,

then exit the vehicle. When all doors are

closed, press lock button to turn off the engine

and arm the system. The system will be able to

remote start as long as the alarm is not

disarmed prior to remote starting.
NOTE: If the turbo timer feature is

programmed, the engine will not turn off until

the end of the turbo timer program cycle.

TURBO TIMER MODE

For vehicles equipped with a turbo-charged

engine, the optional turbo timer feature may be

programmed to run the engine at idle for an

additional period of time after the ignition is

turned off. The run-time may be programmed

for a 1, 3, or 6 minute cycle, allowing the turbo

proper time to cool down, extending its life.

To activate the Turbo Timer feature:

1. Make sure the engine is running.
2. Press button 2.
3. Turn ignition off.

• The engine will continue to run for 1, 3,

or 6 minutes.

4. Exit the vehicle.

7250 rev 2 9-23.qxd 9/24/2004 12:54 PM Page 7

Содержание BW X-Z

























Результаты поиска

Содержание BW X-Z

Отзывы:

Похожие инструкции для BW X-Z

Бренды по названию

Популярные бренды

Black Widow Security BW X-Z, Системное руководство

Результаты поиска

Содержание BW X-Z

Отзывы:

Похожие инструкции для BW X-Z

Бренды по названию

Популярные бренды