MAINTANENCE AND CHECKS.
All technical check-ups and maintenance should be done with the engine shut
off and the spark plug cap removed from the spark plug.
While cleaning the shredder, never spray the bearing with a high pressure
washer! It could cause water to enter the bearings which will cause damage
to the machine; (this is not covered by warranty). The two grease nipples on
the rotor require lubricating once a year or every 500 hours.
Before putting the shredder into storage grease or oil the bearings, blades and
rotor to protect against corrosion.
1.
Points to be checked
2.
Cleaning the machine
For engine maintenance refer to the engine manufacturer’s
engine manual. Note that the first engine oil change is after 5
hours use.
IMPORTANT:
ALL screwed joints on the device must be checked every
10 operational hours to ensure they are securely attached!
