3
4
5
6
parts lIst
maIntenance
• Pour remaining paint into another container and then clean paint cup and air
nozzle. Spray a small amount of thinner to clean the passage. Incomplete
cleaning will cause an adverse pattern shape. Clean thoroughly, immediately
after use.
• Clean other sections with a cloth soaked with thinner.
• Ensure paint passages have been completely cleaned before disassembly.
• Remove fluid nozzle after removing fluid needle set or while keeping fluid
needle pulled, in order to protect seat section.
cautIon:
Never use wire or other hard objects to clear the nozzle or clean the
fluid needle. This will cause damage to the components. Never immerse the whole
gun into solvent such as thinner as it will damage the air nozzle, fluid nozzle and
needle.
troubleshootIng
problem
cause
solutIon
Spray gun spits.
Loose fluid nozzle.
Tighten securely.
Needle adjustment knob
loose.
Tighten.
Loose cup lid.
Tighten.
Spray gun fails to spray.
Vent hole on cover or
fluid connecting nut
clogged.
Dismantle and clean,
thin paint as required.
Thick paint.
Dilute or use bigger
capacity fluid nozzle.
Nozzle clogged.
Disassemble and clean.
Escape of air when the
trigger is released.
Air needle not sliding.
Oil slightly.
Air valve sealing seat too
tight.
Loosen.
Содержание S-770S
Страница 1: ......
