23
RENEGADE -
ITEM CODE:BH66-A
Instruction Manual
Receiver
3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to hold
the battery and receiver securely in place as
pictures below
Do not permanently secure the receiver and
battery until after balancing the model.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Battery
WING ATTACHMENT.
1.Locate the aluminium wing dihedral brace.
*** Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
Aluminium tube 12mm
480mm.
Tie wrap.
2. Attach the aluminium tube into the
fuselage.
Right side.
