24
RENEGADE -
ITEM CODE:BH66-A
Instruction Manual
3. Turn the airplane upside down. Place
your fingers on the masking tape and care-
fully lift the plane .
1) It is critical that your airplane be bal-
anced correctly. Improper balance will cause
your plane to lose control and crash.
THE CENTER OF GRAVITY IS LOCATED
70mm
BACK FROM THE LEADING EDGE
OF THE WING.
2) Mount the wing to the fuselage. Using a
couple of pieces of masking tape, place them
on the top side of the wing
70mm
back from
the leading edge, at the fuselage sides.
Accurately mark the balance point on the
top of the wing on both sides of the fuselage.
The balance point is located
70mm
back from
the leading edge. This is the balance point at
which your model should balance for your first
flights. Later, you may wish to experiment by
shifting the balance up to 10mm forward or
back to change the flying characteristics. Mov-
ing the balance forward may improve the
smoothness and arrow- like tracking, but it may
then require more speed for take off and make
it more difficult to slow down for landing. Mov-
ing the balance aft makes the model more agile
with a lighter and snappier ”feel”. In any case,
please start at the location we recommend .
3. Insert two wing panels as pictures
below.
Left side.
See picture wing attach to fuselage.
Installing the fuselage hatch as same as pic-
ture below.
Secure.
Secure.
BALANCING.
Top side.