23
P- 36A HAWK-Item code BH41-A.
INSTRUCTION MANUAL.
Bottom side.
Rudder pushrod.
Elevator pushrod.
1
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
3x12mm
MOUNTING THE TAIL WHEEL
BRACKET.
1
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
1
2. Mark the locations of the two mounting
screws. Remove the tail wheel bracket and
drill 2mm pilot holes at the locations marked.
3x12mm