EDGE 540-V3-
Item code:BH93
.
INSTRUCTION MANUAL
9
INSTALLING THE ENGINE-THROTTLE.
6 x 45 mm
Left side
Bottom side.
Secure
Top side
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
INSTALLING THE THROTTLE PUSHROD.
Throttle servo
Right side
