Black Horse Model BH180, Инструкция по эксплуатации

Страница: 12 / 36

Instruction manual WESTLAND LYSANDER Item code: BH170
152mm
OPTION 2: INSTALLING THE ENGINE
INSTALLING THE FUEL TANK.
1)
2)
3)
The stopper has been pre-assembled at the
factory.
Using a modeling knife, cut one length of silicon
fuel line (the length of silicon fuel line is calculated by
how the weighted clunk should rest about 8mm away
from the rear of the tank and move freely inside the
tank). Connect one end of the line to the weighted
clunk and the other end to the nylon pick up tube in
the stopper.
Carefully bend the second nylon tube up at a 45
degree angle (using a cigarette lighter). This tube will
be the vent tube to the muffler.
4) Carefully bend the third nylon tube down at a 45
degree angle (using a cigarette lighter). This tube
will be vent tube to the fueling valve.
When the stopper assembly is installed in the
tank, the top of the vent tube should rest just below
the top surface of the tank. It should not touch the top
of the tank.
12
Zip tie
ESC
10x45mm
5 mm Spring Washer
5mm Washer
5x70mm